I have one spare port on the AE and thought about hooking up a spare 10/100 Ethernet Switch I have (D-Link DES-1105). The latter option lets you define the specific range of IP addresses - 10.0.1.25 – 10.0.1.39, for example. I have an Airport Extreme (with Gigabit Ethernet) connected up to my cable modem, my Mac, and my PC. If you choose the former, the base station will dynamically serve, by default, IP addresses within the 10.0.1.2 – 10.0.1.200 range (it can also serve 172.16.1.1 or 192.168.1.1 addresses). If the lock switch is loose and moves easily It is likely the switch is sliding to the. Enable the Distribute IP Addresses option and choose either Share a Single IP Address (Using DHCP and NAT) or Share a Range of IP Addresses (Using Only DHCP). The Network tab is where much of the magic happens. If you have an assigned IP address (and therefore need to configure manually) enter such necessary information as IP address, subnet mask, router address, and DNS servers into the appropriate fields. In the Internet tab tell the base station how you connect to the Internet - Connect Using Ethernet and then choose Using DHCP or Manually from the Configure pop-up menu. If not, launch the AirPort Admin Utility (also located in the Utilities folder), select the base station, and click Continue. Gigabit Ethernet WAN port for connecting a DSL modem, cable modem, or Ethernet network.
Will this Trendnet ethernet switch add the additional ethernet ports I need. Simultaneous dual-band 802.11ac wireless. I may need more than 3 ethernet ports that I currently have on my Apple Airport Extreme. Run the AirPort Setup Assistant (located in the Utilities folder) and see if the questions it asks and the answers you give provide relief. This is probably a very noob networking question, but I am not sure, so I am going to ask anyways. AirPort Extreme 802.11ac - Technical Specifications Size and Weight Dimensions: 3.85 inches (98 mm) by 3.85 inches (98 mm) by 6.6 inches (168 mm) Weight: 2.08 pounds (945 grams) 1 Wireless IEEE 802.11a/b/g/n/ac Six-element beamforming antenna array Simultaneous dual-band 2.4GHz and 5GHz Radio output power: 32. String similarly between the switch and your wired computers. String yet another Ethernet cable between the base station’s Ethernet (LAN) port and one of the ports on the switch. String an Ethernet cable between your DSL or cable modem and the base station’s Ethernet (WAN) port.
0 kommentar(er)
